(

VELOX 350

IMET VELOX 350 Manual circular saw to cut aluminium and light metals

Manual circular saw to cut aluminium and light metals. Mitre cutting from 0° to 45° left and right. The head bends 45° on the vertical axis to allow inclined cuts.

General:

Easy stops at 0°, 15°, 30°, 45° left and right.  Hand-wheel to lock the head on all angles, graduation engraved on the worktable.  Suited to cut aluminium, light metal profiles and solids with high accuracy. 3-phase, 2-speed motor allows to employ HSS blades for brass and copper profiles,  24V low tension with start button inside the handle.  Pair of front vices with quick clamping, free to move alongside the worktable.  (01.) Aluminium removable jaws suitable for many commercial sizes.  Complete blade protection, able to connect chip suction plant. Adjustable length stop.  Base with tank and coolant pump. Pair of springs for head return.

VELOX Cutting capacity at 90 ° round till 120 mm., square till 105 mm. 200×80 mm.





    Vertical Cut VELOX
    The Velox circular Saws , in addition to the standard horizontal inclination from -45 ° to +45° have also the possibility to tilt the head vertically to 45 ° left.
    Pneumatic vice for Velox 350 OPTIONAL
    Upon request pneumatic clamps are available to be combined with manual models VELOX 350, the opening / closing are controlled by the movement of the head.
    Chips Aspirator Velox OPTIONAL
    Upon request a chips aspirator can be supplied to abate most of the chips produced during the cutting phase.

     

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    V- Rollers

    If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.

    Roller tables RTP BS.

    Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.

    VELOX 350
    Area angular cut°-45 / 90 / +45
    Cutting capacity at 90°: round / square / rectangularmm.120 / 105 / 200×80
    Blade dimensionsmm.350
    Blade Motor PowerKW1.5/1.8
    Blade speedRPM1800/3600
    Dimensions ( B x L x H )mm.610x880x990
    Height of the work-tablemm.930
    WeightKg163
    Type of functioningmanual
    Suitable for cutting:Aluminium and light alloys