IMET XSMART 3 INDUSTRY 4.0 READY* Automatic hydraulic double column saw
Automatic hydraulic double column saw with robust mechanical structure associated with advanced technology, the new XSMART3 responds for automatic high production series
CNC control for programming multiple lengths and quantities on the same bar
Feeder carriage with bridge structure and roller conveyor for material support
Material feed by the electric motor and recirculating ballscrews
Double vice for clamping the workpiece before and after the blade
Pulleys Inclination of 30 degrees allows to extend the life of the blade
Double column saw frame with sliding on linear guides recirculating ballscrews
Sliding of the mobile blade guide on linear guides and recirculating ballscrews, with automatic approach of the workpiece
Sensor for automatic detection of the start cut point
Standard vice pressure adjustment
Standard cutting pressure adjustment
Mobile console
Led light for lighting the working area
Completely covered with easy access for maintenance
Electric conveyor chips
Final scrap-end 50 mm
Washing Gun
Double Clamp Bridge feeder structure with roller tables support
Cleaning motorized brush
Modem for teleservice and remote control is supplied as an optional
| Blade guides made of hard metal |  |
|
XSMART motorized blade cleaning brush |
 |
|
SMART portal carriage |
 |
| Roller tables RTS
Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant. |
 |
| Vertical rollers RTS
To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length). |
 |
| XSMART 3 INDUSTRY 4.0 READY | ||
| Area angular cut | ° | 90 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 310 / 310 / 340 x 310 |
| Cutting capacity at 90°: rectangular with cutting bandle | mm. | 340 x 250 |
| Blade dimensions | mm. | 3730 x 34 x 1.1 |
| Inclination of the Blade | ° | 0 |
| Blade Motor Power | KW | 3 |
| Run of feeder carriage (repeatable) | mm. | 500 |
| Feeder motor power | KW | 0.75 |
| Scrap end | mm. | 50 |
| Blade speed | mt/min. | 15÷100 |
| Motor Hydraulic Unit | KW | 0.75 |
| Capacity Tank of Hydraulic Unit | Lt | 20 |
| Capacity Coolant Tank | Lt | 50 |
| Dimensions ( B x L x H ) | mm. | 1950 x 1755 x 1965 |
| Height of the Working-table | mm. | 922 |
| Weight | Kg | 1650 |
| Minimum cuttable length | mm. | 10 |
| Type of Functioning | semiautomatic/automatic CNC | |
| Suitable for Cutting | Steel / cast iron / high-strength steels / alloys | |
