IMET KS 450 Semiautomatic hydraulic bandsaw
KS 450, suitable to cut structural steel, pipes, profiles and beams. Mitre cutting up to 60° left and right, easy stop at 0°,45° left and 45° right.
Very strong steel sawframe with tubular section, pulleys diameter 360 mm.
Hard metal pads inside the blade guides. Possibility to slide the frontal vice along the work table. Wide working space to support the material.
Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start and end cut point.
Mobile console with 3-ways selector to choose different working modalities: the return of the sawframe with steady blade, or end at the cutting cycle without the return of the sawframe.
Cuuting capacity : round till 350 mm., square till 330 mm. and rectangular till 450×320 mm.
| Mobile Console
Imet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed. |
 |
| Nylon clean blade brush KS
As standard nylon blade cleaning brush powered by the movement of the drive pulley.
|
 |
| Minimal lubrication system OPTIONAL
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
|
 |
| Hydraulic power unit KS
In KS bandsaws, the hydraulic power unit is located at the front of the column for a handy and easy access during periodic maintenance |
 |
| Sensor Device KS
All KS saws are fitted as standard with an approaching sensor device for automatic detection of the starting point of cutting. |
 |
| Roller tables KS
Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height |
 |
| Roller tables RTL
Roller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters. |
 |
| Roller tables RTP
Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. |
 |
| Roller tables with motorized rolls RTR
Roller tables with motorized rolls, to be used for both loading– unloading side, driven by pinions, chain and electric motor controlled by an inverter; the management of the roller tables is performed trough a mobile push-button panel provided of: speed regulation movement, direction movement, emergency button,simultaneous or single functioning of the tables. Completable with metric rod, manual positioning with digital reading or motorized version. In the motorized version possibility to memorize up to 10 different lengths through PLC. Position sensor to slow down the run of the material and to guarantee the precision of the lengths of cut. Operation: once selected the sense of advancement of the loading-unloading tables, the operator through buttons moves the material that in proximity of the length stop will slow down automatically till the established measure. |
 |
| KS 450 | ||
| Area angular cut | ° | -30 / 90 / +30 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 350 / 330 / 450 x 320 |
| Blade dimensions | mm. | 4250 x 34 x 1.1 |
| Blade Motor Power | KW | 1.7/2.2 or 2.2 ESC |
| Blade speed | mt/min. | 35/70 or 15 ÷ 100 ESC |
| Dimensions ( B x L x H ) | mm. | 900 x 2500 x 2180 |
| Height of the work-table | mm. | 850 |
| Weight | Kg | 865 |
| Type of functioning | semiautomatic/automatic | |
| Suitable for cutting: | Steel / cast iron / aluminium | |
