IMET H 1200 Semiautomatic twin column bandsaw
Semiautomatic twin column bandsaw for straight cut only, hydraulically driven. Conceived and projected especially for cutting profiles, pipes, beams and also solids.
The steel welded arch with new design and big thickness section guarantees the absolute lack of vibration and noise.
Saw frame movement on linear guide with recirculating balls.
Against the common use the sawframe canted allows saw blade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
Registrable band guides with hard metal pads and guided bearings. The mobile band guide is automatically kept nearest the cutting area. Electronic Inverter for variable blade speed. Driving console movable for a useful and secure positioning, equipped with power and speed regulation.
“Clean cut” due to the standard cooling system with minimal lubrication to cut long pipe and profile without any leakage of coolant.
Cutting capacity at 90 °: Round 520 mm., square 450 mm. Rectangular 680 x 400.
|Area angular cut||°||90|
|Cutting capacity at 90°: round / square / rectangular||mm.||680 / 640 / 1250 x 600|
|Cutting capacity at 90°: rectangular with cutting bundle||mm.||1000 x 350|
|Blade dimensions||mm.||8140 x 54 x 1.6|
|Inclination of the blade||°||5|
|Blade Motor Power||KW||7.5|
|Motor hydraulic unit||KW||1.5|
|Tank Capacity of the hydraulic unit||Lt||20|
|Capacity coolant tank||Lt||3|
|Dimensions ( B x L x H )||mm.||1450 x 4000 x 2750|
|Height of the work-table||mm.||815|
|Type of functioning||Semiautomatic hydraulic|
|Suitable for cutting:||Steel / cast iron / high-strength steels / alloys|