CUBO 300-NC CNC automatic bandsaw
CNC automatic bandsaw,hydraulically driven. Mitre cutting from 0° to 45° left in automatic cycle and from 0° to 60° left in semiautomatic cycle. CUBO 300-NC is an Industry 4.0 tool and has the possibility to use it remotely.
Easy stops at 0°, graduated plate to identify different angles.
High blade tensioning 1700 kg / cm² to increase cutting accuracy and reduce cutting time.
Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
CNC with programming of all operations; automatic calculation of the blade thickness.
Machine status shown on display, including blade speed, piece counter, and working anomalies. setting of the cutting lengths, minimal scrap-end 210 mm. Connection for loading table with 2 vertical rollers, unloading slide, connection for unloading table for cutting pieces.
Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection.
Cutting capacity : round till 255 mm., square till 240 mm. and rectangular till 300×180 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional.
| Minimal lubrication system OPTIONAL
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected. |
 |
| Screw feeder
In all our automatic NC Bandsaws the movement of the feeder is via a recirculating ballscrew and gear motor controlled by an inverter.
|
 |
| Position Sensor BS 300
In all our semiautomatic and automatic saws the detection of the start point of cutting occurs automatically through the position sensor.
|
 |
| Microswitch end cut point BS 300
In all semiautomatic and automatic saws the adjustment of the end cut point is via a lever that activates a microswitch of easy positioning |
 |
| Hydraulic Unit and electrical panel BS 300 AFI
Practical positioning of the hydraulic unit for easy maintenance, electrical panel located under the control panel. |
 |
| Roller tables RTS
Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant. |
 |
| Vertical rollers RTS
To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length). |
 |
| Cubo 300-NC | ||
| Area angular cut | ° | 90 +30 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 255 / 230 / 300 x 180 |
| Cutting capacity at 90°: rectangular with cutting bundle | mm. | max 250 x 120 min 120 x 20 |
| Blade dimensions | mm. | 2765 x 27 x 0.9 |
| Motor Blade Power | KW | 1.5 |
| Run feeder carriage (repeatable) | mm. | 515 |
| Feeder motor power | KW | 0.75 |
| Scrap end | mm. | 210 |
| Blade speed | mt/min. | 18 ÷ 110 |
| Motor Hydraulic Unit | KW | 0.75 |
| Tank Capacity of the hydraulic unit | Lt | 20 |
| Capacity coolant Tank | Lt | 100 |
| Dimensions ( B x L x H ) | mm. | 1800 x 1850 x 1880 |
| Height of the work-table | mm. | 870 |
| Weight | Kg | 680 |
| Minimum cuttable length | mm. | 4 |
| Type of functioning | semiautomatic/automatic | |
| Suitable for cutting. | Steel / cast iron / high-strength steels | |
