fbpx

X SMART3

IMET XSMART 3 INDUSTRY 4.0 READY* Automatic hydraulic double column saw

Automatic hydraulic double column saw with robust mechanical structure associated with advanced technology, the new XSMART3 responds for automatic high production series

CNC control for programming multiple lengths and quantities on the same bar
Feeder carriage with bridge structure and roller conveyor for material support
Material feed by the electric motor and recirculating ballscrews
Double vice for clamping the workpiece before and after the blade
Pulleys Inclination of 30 degrees allows to extend the life of the blade
Double column saw frame with sliding on linear guides recirculating ballscrews
Sliding of the mobile blade guide on linear guides and recirculating ballscrews, with automatic approach of the workpiece
Sensor for automatic detection of the start cut point
Standard vice pressure adjustment
Standard cutting pressure adjustment
Mobile console
Led light for lighting the working area
Completely covered with easy access for maintenance
Electric conveyor chips
Final scrap-end 50 mm
Washing Gun
Double Clamp Bridge feeder structure with roller tables support
Cleaning motorized brush
Modem for teleservice and remote control is supplied as an optional





    Blade guides made of hard metal

    XSMART motorized blade cleaning brush

    SMART portal carriage

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Vertical rollers RTS

    To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length).

    XSMART 3 INDUSTRY 4.0 READY
    Area angular cut ° 90
    Cutting capacity at 90°: round / square / rectangular mm. 310 / 310 / 340 x 310
    Cutting capacity at 90°: rectangular with cutting bandle mm. 340 x 250
    Blade dimensions mm. 3730 x 34 x 1.1
    Inclination of the Blade ° 0
    Blade Motor Power KW 3
    Run of feeder carriage (repeatable) mm. 500
    Feeder motor power KW 0.75
    Scrap end mm. 50
    Blade speed mt/min. 15÷100
    Motor Hydraulic Unit KW 0.75
    Capacity Tank of Hydraulic Unit Lt 20
    Capacity Coolant Tank Lt 50
    Dimensions ( B x L x H ) mm. 1950 x 1755 x 1965
    Height of the Working-table mm. 922
    Weight Kg 1650
    Minimum cuttable length mm. 10
    Type of Functioning semiautomatic/automatic CNC
    Suitable for Cutting Steel / cast iron / high-strength steels / alloys