(

H 601

IMET H 601 Semiautomatic twin column bandsaw

Semiautomatic twin column bandsaw, hydraulically driven. Especially adapt to cut sections of steelwork, tubes and solids.
Possibility to make cuts with variable angle up to 60° to the left, with the manual shifting of the saw frame.
Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings.
Sawframe movement onto an electro welded column of big dimension, through two recirculating ballscrews linear guides.
Pulley diameter 520 mm. Long-Life monobloc motoreducer.
Registrable band guides with hard metal pads and guided bearings.
Electronic Inverter for variable blade speed.
Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through the console.
Mechanical tensioning of the blade with a control micro switch.
Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180×100 mm.





     

    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    Scale H 601

    On the saws H 601 the reading of the cutting is done through graduations easy to read positioned in front of the machine.

     

    Pulleys H 601

    The H 601 saws have cast iron big pulleys to avoid excessive strain of the blade.

    Wide chip collector

    As standard the bandsaws Model KS have a wide chip collector.

    Mobile Console

    Imet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed.

     

    Roller tables KS

    Roller tables with free rolls to be used both on loading side and unloading side , with electrowelded steel structure, element of 1,5 meters, support pads and a pedestal. Fitted for the ground fixing and with possibility of regulation of the height

    Roller tables RTL

    Roller tables with free rolls to be used on the unloading side, with manual movement, length stop and reading of the measure through LCD display, the length stop slides on balls recirculation guide, available in forms from 3 meters.

    Roller tables RTP

    Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.

    Roller tables with motorized rolls RTR

    Roller tables with motorized rolls, to be used for both loading– unloading side, driven by pinions, chain and electric motor controlled by an inverter; the management of the roller tables is performed trough a mobile push-button panel provided of: speed regulation movement, direction movement, emergency button,simultaneous or single functioning of the tables. Completable with metric rod, manual positioning with digital reading or motorized version. In the motorized version possibility to memorize up to 10 different lengths through PLC. Position sensor to slow down the run of the material and to guarantee the precision of the lengths of cut. Operation: once selected the sense of advancement of the loading-unloading tables, the operator through buttons moves the material that in proximity of the length stop will slow down automatically till the established measure.

     

    Vertical Rollers RTSKS

    In case that your sawing machine mounts the bundle cutting device, it is advisable to request some vertical containment rollers for the material to be cut.

    H 601
    Area angular cut°90 / +30
    Cutting capacity at 90°: round / square / rectangularmm.500 / 450 / 610 x 440
    Cutting capacity at 90°: rectangular with cutting bundlemm.600 x 250 max 150 x 50 min
    Blade dimensionsmm.5320 x 34 x 1.1 or on request 5320 x 41 x 1.3
    Blade Motor PowerKW3 or on request 4
    Blade speedmt/min.15÷100
    Motor hydraulic unitKW0.75
    Tank Capacity of the hydraulic unitLt20
    Capacity coolant tankLt60
    Dimensions ( B x L x H )mm.1500 x 2850 x 2170
    Height fo the work-tablemm.820
    WeightKg1700
    Type of functioningSemiautomatic hydraulic
    Suitable for cutting:Steel / cast iron / high-strength steels / alloys