fbpx

SIRIO 370 AF-NC

IMET SIRIO 370 AF-NC * Automatic CNC vertical column circular saw

Automatic CNC vertical column circular saw; mitre cutting from 0° to 45° right (only semiautomatic cycle) and from 0° to 60° left.

  • Suited to cut high-resistance steel, the version with electronic Inverter widens the cutting possibilities, from stainless steel to brass and copper.
  • Primary transmission with pulleys and cogged belt, final reduction in oil bath with big-size bronze crown gear.
  • Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping; anti-burr adjustable device, pneumatic vertical vice.
  • Blade spindle with 40 mm diameter.
  • Electro-pneumatic driven functioning,hydraulic control of the down-feed speed of the head.
  • Feeder movements by electric motor with encoder,200 mm. opening, minimum stroke 4 mm.(minimum scrap-end 170 mm.), maximum stroke 520 mm.
  • Up to 99 programs can be memorized, each one with different cutting lengths and number of cuts.
  • Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180×100 mm.

*The modem for Industry 4.0, teleservice and remote control is supplied as an optional.





     

    SIRIO quick vice lever

    All circular saws mod. SIRIO have as standard transverse displacementof of the pneumatic front vice.

    SIRIO Feeder

    The feeder of the saw model SIRIO AF and AF-E-CN is mounted on a floating plate to adapt to the load of bars of material which is not perfectly straight. The movement is through an hydro pneumatic cylinder (AF-E) or through a toothed belt and motoreducer (AF-NC).

    SIRIO AF electrical board

    The electrical board of the automatic vertical column circular saws SIRIO AF-E or AF-NC is placed in the rear of the machine in a comfortable position in case of technical intervention.

    SIRIO blade cleaning brush

    On all SIRIO models, nylon brushes are mounted to avoid damaging the cutting edge of the blade and to keep it always clean

    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    Display MAHLER

    On our circular saws models SIRIO 370 AF-350 AF-VELOX NC and NC, the control system has some tactile buttons and a large LCD display easy to read. Can store up to 99 cutting lines with different lengths and quantities and store up to 99 cutting programs.

    Sirio V-Jaws OPTIONAL

    With the application of the cast iron V-Jaws it is possible to cut a bundle of tubes, diameter 85 mm max.; provided with assembling kit.

    Bar Loader SLB 6 OPTIONAL

    Bar loader for automatic CNC saws Sirio 370 AF-NC and VELOX 350 AF-NC. Suited to cut tubes with size from 20 to 90mm (round), 80×80 (square) or solids up to 50mm diameter, of 6 mt. lenght. Working cycle: (04.) when a bar is cut, a device driven by pneumatic cylinder, lifts the bar in the line and place it in on the loading table; then a motorized rubber-coated wheel forwards it to the saw. After reaching the cutting point, the vices of the saw clamp the material, (03.) the motorized wheel lifts and the cutting cycle begins. (02.) Loading plane is 6mt. long and 750mm. wide with adjustable inclination. The structure includes welded metal profiles, wholly protected by safety guard made of punched metalsheet and tubes. On request, special device to load smaller bars, from 20 mm till 10 mm diameter.

     

    RASAFC

    Connection element for loading table. Suitable for SIRIO 370 AF-E and AF-NC

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    V- Rollers

    If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.

    Sirio 370 AF-NC
    Area angular cut ° -45 / 90 / 30
    Cutting capacity at 90°: round / square / rectangular mm. 120 / 100 / 180 x 100
    Blade dimensions mm. 370
    Blade Motor Power KW 3
    Run feeder carriage (repeatable) mm. 520
    Scrap end mm. 170
    Blade speed RPM 15 ÷ 70 ESC
    Capacity coolant tank Lt 40
    Dimensions ( B x L x H ) mm. 1900 x 1450 x 2100
    Height of the work-table mm. 925
    Weight Kg 740
    Minimum cuttable length mm. 4
    Type of functioning semiautomatic/automatic CNC
    Suitable for cutting: Steel / cast iron / high-strength steels