Kovosvit MCV 800 QUICK CNC Vertical machining center
X / Y / Z – 800 / 500 / 550 mm
Table clamping surface: 1 000 x 500 mm
Max. weight on table: 500 Kg
Max. speed: 12 000 rpm
Linear rolling guides with direct measuring of all axes.
Increased starting of X axis = 800 mm.
Small built-up machine area, improved ergonomics ⇒ lower spatial requirements.
Innovation of kinematic con guration of cross-table ⇒ Increased static rigidity of load-bearing structure.
New developed machine variant with worm chip conveyor ⇒ compactness (machine length decreased by 1200 mm as compared to link conveyor).
Increased number of clamping grooves on the table.
Heidenhain TNC620, Siemens 828D control system.
Innovated spindle ⇒ Decreased noise level, maximum revolutions incerased to 12 000 min-1.
| TECHNICAL DATA | MCV 800 QUICK | |
| Main dimensions | ||
| Table clamping surface | mm | 1000 × 500 |
| Number of table T-slots | ks | 5 |
| Table T-slots width and spacing | mm | 18 / 100 |
| Largest table track length (X) | mm | 800 |
| Largest slide track length (Y) | mm | 500 |
| Largest spindle track length (Z) | mm | 550 |
| Maximum workpiece weight (table load) | kg | 500 |
| Max. workpiece dimension for max. tool length | mm | 800 × 500 × 300 |
| Maximum drilling diameters (motor 10 kW) | ||
| Drilling full diameter to steel of strength 600 MPa with drill bit from RO | mm | 25 |
| Drilling full diameter to steel of strength 600 MPa with drill bit | mm | 30 |
| Thread diameter with cutting to steel with strength 600 MPa | mm | M20 |
| Spindle | ||
| Spindle taper | – | ISO 40 |
| Distance from spindle nose to table clamping surface | mm | 100 – 650 |
| Maximum speed | min-1 | 12 000 |
| Spindle motor power (S1/S6 – 40%) | kW | okt.14 |
| Spindle motor torque (S1/S6 – 40%) | Nm | 63 / 88 |
| Speed change | – | continuously variable |
| Tool clamping force | N | 18 000 |
| Accuracy | ||
| Measuring system X, Y, Z Heidenhain / Siemens | – | direct |
| Feed rate | ||
| Rapid feed | mm.min-1 | 30 000 |
| Working feed | m.min-1 | 15 000 |
| Ball screw – Diameter | mm | 32 |
| Ball screw – Pitch | mm / rpm | 10 |
| Max. tank capacity | l | 200 + 80 |
| Pneumatic equipment | ||
| Working pressure | MPa | 0,6 |
| Air consumption | m3/hour | 03.apr |
| Machine dimensions | ||
| Length | mm | 2086 |
| Width | mm | 2745 |
| Height | mm | 2420 |
| Weight | kg | 4000 |
| Connection of the machine | ||
| Max. total machine input | kVA | 20 |
| Tool magazine | ||
| Number of positions – left magazine | – | 24 |
| Max. tool length | mm | 250 |
| Max. tool diameter – All positions occupied | mm | 80 |
| Max. tool diameter Neighbouring position skipping | mm | 120 |
| Change time of adjacent tool (tool – tool) | s | 3,8 |
| Max. tool weight | kg | 6,5 |
| Max. tool weight in the magazine | kg | 65 |
