IMET xt4* High production twin column bandsaw
High production twin column bandsaws, XT4 is suitable for a variety of cutting requirements,combining advanced technology with an extremely solid mechanical structure.
It has one system that allows the vices to ‘back off’ to avoid the blade rubbing on the cut surface during the ascent of the sawframe for the following cut.
The added advantage of this design enables the use of high performance TCT bandsaw blades. Hydraulically pressure of ground TCT blade guides for maximum precision and squareness of cut.
With the option “Short Batch & ‘One Off’ Sawing” there is the possibility to cut not completely the material section in automatic cycle.
Automatic Trim Cut option, if the material has an accettable pre sawn face, it will be accurately & automatically located relative to the blade ‘zero’position. This feature saves time and cuts down on material wastage.
All operating functions of the machine, errors and problem solving messages are clearly displayed.
A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the sawframe descent speed in the event of blade deviation.
Cutting capacity at 90 °: Round and square 360 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
|IMET XT 4|
|Area angular cut||°||90|
|Cutting capacity at 90°: round / square:||mm.||360 / 360|
|Cutting capacity at 90°: rectangular with cutting bandle||mm.||360 x 350|
|Blade dimensions||mm.||5900 x 41 x 1.3|
|Inclination of the Blade||°||0|
|Blade Motor Power||KW||5.5|
|Run of feeder carriage (repeatable)||mm.||500|
|Feeder motor power||KW||1.5|
|Motor Hydraulic Unit||KW||3|
|Capacity Tank of Hydraulic Unit||Lt||60|
|Capacity Coolant Tank||Lt||100|
|Dimensions ( B x L x H )||mm.||2800 x 1794 x 2210|
|Height of the Working-table||mm.||877,5|
|Minimum cuttable length||mm.||15|
|Type of Functioning||semiautomatic/automatic CNC|
|Suitable for Cutting||Steel / cast iron / high-strength steels / alloys|