KTECH 502 F2000 INDUSTRY 4.0 READY Twin column automatic double miter saw
The K-Tech 502 F2000 , the natural development of the automatic version of the KS 502, has its movements guided by supports on heavy load balls type linear guideway, CNC control for clamps and arc rotation.
Control of cutting angles by encoder and inverter, optimized selection of cuts via cnc for multiple operations with simple guided programming.
It has an integrated keyboard with CNC control on 3 axes, large RAM memory, LCD display for guided setting of cut parts with the necessary angles, possibility of cutting with double angle on one side.
The numerical control allows to set and save over 300 cutting programs with different shapes,quantities and lengths.
Monoblock column and frame with conveyor in an electrically welded solid steel structure. High precision of positioning thanks to the linear hardened guides and to the recycling screw with a diameter of 32 mm, controlled by inverter.
Steel saw frame with tubular cross section; table for material supported by a central preloaded bearing. Adjustable bearings with conical rollers on a swinging pin. Single-block longlife gearmotor.
Blade tension 1700 Kg/cm2 with blade guide runners adjustable with hard metal inserts and guide bearings.
Adjustment of the force and speed of saw frame descent with separate controls, to adapt the cutting parameters to the type of material.
Total stroke 2050 mm, minimum scrap end 165 mm at 0°. Minimal lubrication system as standard.
End of the cut with tilted blade – minimum 5° on 450 mm ensure better penetration, increased blade life and rapid action.
Cuuting capacity : round till 310 mm., square till 280 mm. and rectangular till 450×270 mm.
*The modem for Industry 4.0, teleservice and remote control is supplied as an optional
|KTECH 502 F2000 INDUSTRY 4.0 READY|
|Area angular cut||°||-30/90/+30|
|Cutting capacity at 90°: round / square / rectangular||mm.||350 / 335 / 500 x 325|
|Cutting capacity at 90°: rectangular with cutting bundle||mm.||max 500 x 250 min 160 x 40|
|Blade dimensions||mm.||4250 x 34 x 1.1|
|Blade Motor Power||KW||2.2|
|Run of feeder carriage (repeatable)||mm.||2050|
|Feeder motor power||KW||0.75|
|Blade speed||mt/min.||18 ÷ 100|
|Motor hydraulic unit||KW||0.75|
|Tank Capacity of the hydraulic unit||Lt||20|
|Capacity coolant tank||Lt||3|
|Dimensions ( B x L x H )||mm.||4120 x 2300 x 2180|
|Height of the work-table||mm.||810|
|Minimum cuttable length||mm.||30|
|Type of functioning||semiautomatic/automatic CNC|
|Suitable for cutting:||Steel / cast iron / high-strength steels|