IMET GBS 185 GH Autocut Manual bandsaw
Manual bandsaw or with gravity lowering mitre cutting from 0° to 60° left.
Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles.
Band guides with bearings for blade alignment, pulleys with 260 mm diameter.
AUTOCUT GH Version with “3 Ways” Selector:
– A Manual cut.
– B Manual cut with self-brake.
– C Automatic cut with adjustable down-feed rate and stop at the end of the cut. The user can move manually the sawframe close to the material,then let the machine makes the cut adjusting only the down-feed rate.
Cutting capacity at 90° round till 185 mm., square till 180 mm. and rectangular till 200 x 150 mm.
Blade guides with hard metal padsBlade guides with hard metal pads with adjusting screws to compensate the wear and tear. |
 |
Minimal lubrication system OPTIONALIt is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected. |
 |
| Roller tables RTS
Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant. |
 |
| Roller Tables RTM
Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle. |
 |
| Roller Tables RTD
Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button. |
 |
| GBS 185 GH Autocut | ||
| Area angular cut | ° | 90 + 30 |
| Cutting capacity at 90°: round / square / rectangular | mm. | 185 / 180 / 200 x 150 |
| Blade dimensions | mm. | 2080 x 20 x 0.9 |
| Blade Motor Power | KW | 0,8 |
| Blade speed | mt/min. | 30/60 |
| Dimensions ( B x L x H ) | mm. | 600 x 1200 x 1700 |
| Height of Work-table | mm. | 900 |
| Weight | Kg | 215 |
| Type of functioning | Manual/Gravity | |
| Suitable for cutting: | Steel / cast iron / aluminium | |
