fbpx

BS 400 GH AUTOCUT

IMET BS 400 GH Autocut bandsaw

Autocut bandsaw, mitre cutting from 0° to 60° left and from 0° to 45° right. Easy stops at 0°, 45°, 60° left and 45° right.
Blade guides with hard metal pads, additional bearing for blade alignment.
Steel sawframe with tubular section, pulleys 360 mm diameter.
Wide working space 460 mm diameter with rotating table integral with the sawframe to avoid incisions of the table, rotation on thrust ring with pre-loaded thrust bearing.
Blade tension 1900 kg/cm² adjustable from the front side of the sawframe, checked by an end-stroke.
Cutting Capacity: rounds till 310 mm., square till 280 mm. and rectangular till 400×250 mm.





    Minimal lubrication system OPTIONAL

    It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.

    Blade Cleaning Brush BS 350

    All saws model BS 350 have, as standard , the blade cleaning brush that is moved by the rotation of the drive pulley.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    Roller tables RTP

    Loading-unloading tables with motorized movement of the length stop with the possibility to plan 10 different lengths through PLC . Movement through toothed strap and geared motor on ball recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms of 3 meters. Automatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control.

    IMET BS 400 GH Autocut
    Area angular cut ° -45 / 90 / +30
    Cutting capacity at 90°: round / square / rectangular mm. 310 / 280 / 400 x 250
    Blade dimensions mm. 4020 x 34 x 1.1
    Blade Motor Power KW 1.5/2.2 or 2.2 ESC
    Blade speed RPM 37/74
    Dimensions ( B x L x H ) mm. 1530 x 1790 x 2240
    Height of the work-table mm. 940
    Weight Kg 640
    Type of functioning Manual/Gravity
    Suitable for cutting: Steel / cast iron