fbpx

VELOX 350 SHE

IMET VELOX 350 SHE Semiautomatic circular saw suited to cut aluminium and light metals.

Semiautomatic circular saw suited to cut aluminium and light metals solid and profiles with high accuracy. Possibility to set the machine for brass and copper profiles. The head bends 45° on the vertical axis to allow inclined cuts.





    Easy stops at 0°, 15°, 30°, 45° left and right.

    Hand-wheel to lock the head on all angles, graduation engraved on the worktable.

    Suited to cut aluminium, light metal profiles and solids with high accuracy.

    Electro-pneumatic functioning, hydraulic control of the down-feed speed of the head.

    Programming of all operations by means of the keyboard, including setting of the start-cut and end-cut points

    Machine status shown on display, including blade life and speed, piece counter, cycle time, motor absorption; working anomalies.

    Pair of front pneumatic vices with quick clamping, free to move alongside the worktable.

    Complete blade protection, device to connect chip suction plant, adjustable length stop.

    Floor stand with tank, lubrication system with spray and rear chips collector.  Air filter/reducer/lubrication group.

    Possibility to connect external devices such as a foot pedal to start the cutting cycle.

    Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection, motor absorption device, 24V low tension.

    Cutting capacity at 90 ° round till 120 mm., square till 105 mm. 200×80 mm.

    Tron interior photo

    The PLC TRON controls all operational functions of the saw and provides information about the operating conditions of the machine (cutting time, blade speed, blade life, number of cuts made), complete with self-diagnostics for quick resolution of any problems encountered.

    Foot Pedal Control OPTIONAL

    Upon request for semi-automatic sawing machines a foot pedal control is available.

    Velox V-Jaws

    With the application of the aluminum V-Jaws it is possible to cut a bundle of tubes, maximum diameter 85 mm.; provided with asssembling kit.

    Chips Aspirator Velox OPTIONAL

    Upon request a chips aspirator can be supplied to abate most of the chips produced during the cutting phase.

     

    Roller tables RTS

    Roller tables with free rolls, to use for loading side and unloading side, made of an electrowelded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

    Roller Tables RTM

    Same structures of the RTS roller tables, to be used on the unloading side with length stop and metric rod for the reading of the length, mechanical block in position by handle.

    Roller Tables RTD

    Roller tables with free rolls and length stop through a hand-wheel with chain transmission and reading of the measure through LCD display. Automatic and pneumatic withdrawal of 50 mm to facilitate the unload of the cut piece, return in position through a button on the control. Turnover of the length stop with a button on the control, through pneumatic piston. Block in position is also pneumatic through a button.

    V- Rollers

    If the V-jaws are required , it is advisable to apply on the roller table a pair of V-rollers , we suggest 6 pairs maximum every 2 meters of roller table.

    Roller tables RTP BS.

    Roller tables with free rolls, length stop and motorized movement with possibility to plan 10 different lengths through PLC. Movement through toothed belt and geared motor on balls recirculation guides . Length stop through pneumatic cylinder. Reading of the position through encoder and rack. Available in forms from 3 meters. Automatic withdrawal of 50 mm to facilitate unloading of the cut piece, return in position through a button on the control.

    VELOX 350 SHE
    Area angular cut ° -45/90/+C45
    Cutting capacity at 90°: round / square / rectangular mm. 120 / 105 / 200 x 80
    Blade dimensions mm. 350
    Blade Motor Power KW 2.2
    Run of the feeder carriage (repeatable) mm. 520
    Scrap end mm. 355
    Blade speed RPM 3600
    Capacity coolant tank Lt 40
    Dimensions ( B x L x H ) mm. 1800 x 1300 x 1800
    Height of the work-table mm. 930
    Weight Kg 590
    Minimum cuttable length mm. 4
    Type of functioning semiautomatic/automatic
    Suitable for cutting: Aluminium and light alloys